I highly recommend a Coleman Mach 8 cub or a Mach III PS. Both draw little current. I can run my Mach 15 and Mach 8 cub on the Onan 4000 in the Texas summer heat with no problems If you have a good electric knife, you can cut the Styrofoam to work with the existing ducts, but you will need another thermostat and lower A/C duct work for cut ducts. The Mach 8s have three motors: compressor condenser fan and evaporator fan, so they are quieter than the standard Mach III or Mach 15.
__________________
Jim & Roy Davis
2016 Hurricane 31S
1961 Rampside in tow
|