|
They are for sure the seat belt bolts. If you don't want seat belts you can remove them and install flat head stove bolts from the top down, same diameter into the holes to plug them up. Coat the new ones with sealant before installing. Your adhesive for the new floor will fill in any small indentation on the surface. Also, make sure you grind the bottom (outside under the slide) off as low as you can so the extrusion doesn't hit anything along the way in and out.
__________________
Now an SOB
Traded Thor for Melbourne Prestige 24NP
2018 THOR Chateau 35SF
Two Labs, Bugsie & Blondie
Blondie passed in 2020 at 5 to Leukemia
|
Thor Forums
