Quote:
Originally Posted by Dadsbum
Just got my Thor Outlaw back from the service dept after 3 flippen months and now the heat won't work and it's freezing. Any help would be great
|
i had problems with my Attwood furnace
after much thought and trying all the normal tricks listed...I finally took a screwdriver and wrench to it.
- pulled it apart (disconnect propane line, pull-off a few electrical connectors, and just 4 or 5 screws...if i recall)
- blew everything out with compressed air
- re-adjusted the spark unit and moved it closer to the flame assembly
- then reconnected everything
Voila! it then worked perfectly
it's very simply built, not much to it other than spark, burner, and the computer board
it's more stressful thinking about it than the actual dis-assembly/re-assembly process
and it took no more than 30 minutes
suggestion...take a couple of photos to refer to for the electrical connections, just to make sure that they go back to their proper locations
Thor Forums
