Radio Bezel removal
We found out that the Windsport is XM ready not capable. We needed n XM tuner to make it work, the salesman said it had XM.
Anyway the radio installation place didn't want do the install for liability reasons.
I bought the tuner about $70. First problem was getting the bezel off the dash, check You tube no luck with the F 53 dash board type I have.
I started taking parts off till I was able to feel a couple nuts coming from the bezel thru the dash panel, took those two off, found two more and two more after that. Once the bezel was loose I just pulled it out of the dash and laid in down to get to the back of the radio, Plugged in the two connectors and that part was done.
When I get back for our trip I'll look at putting the antenna on the roof that will take some time . If anyone has routed a wire to the roof please let me know what you did.
The bezel is held in place with 6 stud/nuts 9MM2 at the lower corners of the bezel, 2 about even with the switches and 2 more that come down from the horizontal part of the bezel. All reachable reaching up along side the radio, I found it easier with the dog house removed. Good luck
__________________
|