Quote:
Originally Posted by Kbs
Have a 2017 class c 31 p. Going along with this thread, my chassis battery was dead. So I hit the emergency start switch, thinking it would kick the engine over. Nothing, not even a click.... is there some procedure to using this that I may have missed...?? Or is it another sigh, fun with Thor time....?? I carry a jump battery so no problems but would like to know if I am using it incorrectly. Also any ideas how to test it if the chassis battery is charged.?. Thanks
|
Emergency start switch simply connects all the batteries. To use - press and hold the emergency switch in for about one minute and then still holding the switch in turn the key to start.
To test to see if the charger is charging the chassis battery(s) - plug the coach in or start the generator with the use/store switch in the use position or master power switch on and wait 5 minutes. Use a plug in voltmeter (plugs in a dash power port) or probe type volt meter across thew chassis battery terminals. If the voltage is less the 13.0 volts the battery is not being charged. If the voltage is more than 13.0 volts the battery is being charged.