Quote:
Originally Posted by Deacon Blues
I installed my Hellwig front sway bar today. Unfortunately, Hellwig didn't include the torque setting for the end link bolts.
Does anyone know what the ft/lb setting would be for my 2015 Axis (E350 chassis).
|
I went to my local Ford dealership today and asked about the correct torque figures for the front sway bar.
The torque for the endlinks (or end bars) is 59 ft/lbs
The torque figures for the front brackets that hold on the sway bar are 111 ft/lbs for the big (18mm) bolt and 18 ft/lbs for the smaller (15mm) bolt. Note that the 18 ft/lbs number is not a mistake.
What an odd bracket bolt ft/lb combo.