Quote:
Originally Posted by jabrabu
My big 32' class C has a lot of weight at the rear, and it could use some more clearance for the rear levelers. I was thinking that it could benefit from helper springs or lift blocks at the rear. But it sounds as if this would decrease the effective caster, so maybe that's not a good idea.
|
On our class C, the rear levelers have room to move up a notch or two.
The bolt holes on the leveling jack cylinders are 1" apart.
I raised ours because they scraped, then on the fronts, there is physically no room to unbolt them and raise them to remount, so they stayed where they were.