Thanks for your help @Long & Winding road
I followed your guidance and the install went really well. I mounted the antenna to my ladder on the rear and drilled a hole in the roof next to the antenna. I then used the weboost adhesives on the roof and the sealed the hole w/ lapseal. I mounted the amplifier behind the tv over the door and then attached the 12V power wire to the antenna amplifier. That was a bit of a pain to access/get. See pics below.
Thanks for the help, the amp works great. I have not yet figured if i want to permanently mount the indoor reciever or leave it loose as i get better service when its closest to my phone or jetpack.
Notes about the photos:
1st photo: black wire from ceiling is websoote amp
2nd photo: just ran the 12V power wires directly into lead for antenna amp for testing. I cut and replaced the pink connectors and ran both wires into the crimp of the connectors.
3rd photo: upside down
__________________
|