Thor Forums

[Carle]

2016 Thor Vegas 24.1

I just had 2 additional tail light fixtures installed on the back of the unit up higher for additional visibility when my scooter is on the rack.

There are 2 red lights on either side of each fixture with a backup light in the middle. Brake, signals and back up work fine. So 3 bulbs each fixture. With the 6 additional bulbs (3 each side) the amperage seems to be too high and the fuses trip. When removing 1 bulb from each side it does not trip. So it just means I have only 1 brake bulb on each side rather than 2 each. The lower originals are all fine of course. I had all LED bulbs but still tripped.

The installation was done by a professional and an electrical guy could not determine the cause. They said they tested the fixtures and they are not faulty.

Just wondering if anyone has run into this problem. Thanks.