|
Robert,
During my shakedown cruise my radio kept losing power. When I got home I removed the top part of the dash and went in and added some bracing under the radio because the radio was not properly secured and there is a large gap under the radio mount. a 3/4 inch piece of plywood slid under the radio and filled the gap nicely. Took about 30 minutes and also allowed me to tie down some loose wiring while in the area. If interested the top part of the dash (2 humped cover) is held on by I believe 4 Phillips head screws. Easy job to do.
__________________
Dave
US Army (Ret)
2020 Entegra Accolade 37TS
2019 Jeep Grand Cherokee Trailhawk (Toad)
FMCA - F432054
|
Thor Forums
