I'm not sure where you installed the accumulator tank but it should be on the high pressure header and susceptible to both pump and shore water pressure; so I normally set mine to 45 PSI. Follow the procedure for your tank but normally this is done while empty.
BUUUT; an accumulator tank should not affect your pump pressure; it just minimizes the cycling of the pump.
So go back and re-look at your installation if your pump pressure was better before the tanks was installed.
__________________
Ted & Melinda
2016 ACE 27.1
2016 Chevy Sonic Toad - Selling
2020 Chevy Colorado Z71 Trail Runner Toad
2024 Chevrolet Trax 2RS - Soon 2B TOAD
|