|
The Xantrex Pro has a 15 amp circuit breaker located on the inverter itself. It is on the left side near the front. A small black button. If you have power to the inverter at the 12 volt cables, you could have a loose data cable connection. Try disconnecting and reconnecting the data cable. Last resort is to remove all power 120 volt and 12 volt. 120 volt can be removed by the circuit breaker but a 12 volt cable at the inverter will have to be removed to ensure power removal. This will allow a full reset of the inverter. Hopefully it will return to normal operation after restoring power.
__________________
Jim & Roy Davis
2016 Hurricane 31S
1961 Rampside in tow
|
Thor Forums
