"Basic" thermostats which call for cooling should also include a built in time delay (typically only for several minutes) that prevent starting the A/C compressor immediately. This (one reason) is mainly to prevent short cycling the compressor which can be damaged if head pressure is not bled off from a previous cooling cycle, before the next cooling cycle starts. When you say 20-60 min delays before the gen will restart....do you mean there is a call for cooling again, and the gen cranks but wont start until it cools down for 20 to 60 minutes......or do you mean the thermostat or AGS system does not call for a restart for 20-60 minutes?
__________________
|