You may have a loose wire on the fuse panel in the converter area. I had a loose wire and drove me crazy trying to find it. Since the wire was after the fuse, the fuse showed good.
I had to "pull" on the wires and, lo and behold, the wire came loose in my hand.
The most frustrating part of this is it worked for a year, then quit. When I started trouble shooting, it would start working again. The wire would make contact until it didn't.
After stripping the end and securing havent had the issue again
__________________
2016 25.2 VEGAS with 2017 Jeep Wrangler AND Two Dogs; Norwegian Elkhound & Morkie (The RV is actually the Dog's)
|