Quote:
Originally Posted by Jack5319
It clicks and I see no arc. Tried hand lighting and got a quick blow but no light.
|
Sounds like the gas valve is opening but you see no spark. You might want to check this in shade or at night and make sure the spark is not shorting somewhere else along the wire between the board and the intended spark gap electrode. If you see spark in the wrong place, the board is working (probably) but the wire needs to be moved, insulated or replaced so the spark shows up where it is supposed to be.....in the gas. If there is no spark anywhere then I would suspect your board high voltage section may have failed.
Thor Forums
