Quote:
Originally Posted by machyoung
Thanks Beau for the recommendation. The one thing that I will say is that there is absolutely no ac load at present. I have the inverter off. As soon as I plug into shore power or fire up the gen, it starts beeping (alarm) and displaying the error code. I cannot get it to shut up w/o powering down the gen (if on), or unplugging from shore power.
Should I still try the reset?
|
I gave you the factory way of resetting the unit. Remember all power AC and DC must be removed from the inverter for approximately 24 hours to reset the computer in the inverter. That way the computer assumes it is in the shipping box and ready for a new installation. It takes a while for the capacitors to discharge completely. Make sure you isolate the DC (battery) from the inverter.