|
To prime the generator: Hold the switch to the "Stop" position. The light should turn on after a few seconds. Hold for about 15 seconds. (If someone is near the generator they should hear the fuel pump running when you are doing this.)
Also note that Cummins shipped some genny's with bad fuel pumps for a while there. Ours had one: Was running fine on the road one day when it just up and quit. I couldn't get it running after that. The Cummins tech replaced the pump in about 10 minutes (funny he knew exactly what to do and had it all done quickly--before the paperwork could even be done).
|
Thor Forums
