Quote:
Originally Posted by Cpd
Same as yours....love the mods. Want so badly to take out the dining and replace with a table and chairs.
|
Removing the forward bench is an easy Mod. I did this to my MH by replacing the bench with folding chairs like this, purchased from CW online.
Replacing the table is also a fairly easy task (although I didn’t do it) by installing flush mounted floor receptacle(s) and a new table top. (Examples. Internet research will discover multiple options)
This will allow the table to be removed and stowed when not in use.
Note: removing the existing table will leave holes in the side wall
The most difficult part is what to do about the aft bench. The bench has seat belt structure underneath. If eliminating those seat belt positions is not a problem, this structure can be removed. However, beneath the bench there are also wires and cables routed up from below. These wires and cables are for: The CO2 detector, a 120v outlet (both mounted in the forward face of the bench seat) and coax for the outside TV.
The main reason I did not remove the aft bench was I didn’t want to mess with finding a location to relocate these items to.
Good luck in finding an acceptable solution to your issue.