Quote:
Originally Posted by gnach
I had some time to finish up my closet shelving mod. I used the Closet Maid 16" wire shelving from the Depot. I bought 3 pieces x 6ft. The top shelf is supported in the front by small shelf angle bracket and by coax cable supports in the back. Zip ties hold it to the front brackets. The cubby unit was cut to fit below the top. The sides fit up tight to the top shelf and are notched in front for the top shelf's lip and for the existing closet pole. Two shelves were cut from leftover side piece. The side were cut with the heavier 1/4" rods cut flush. The shelves were cut in between the small wire so the 1/4" rods are ~1/2" long and rest on the small wires (horizontal) on the side pieces. Zip ties were used to hold it all together. I used a reciprocating saw for all cuts.
|
I also finally got around to doing something about the closet in my 25.2. It is a great amount of storage, but I didn’t use it for hanging clothes. So, after trying to figure how to address it for a year, I finally found some wire shelves from Home Depot. I got two of them and put them together (see pictures).
Now, I have the same amount of stuff in the closet, but it’s not all sitting on top of one another.