This would require custom work and a bit of welding but...shorten the distance between where it come from the bottom of the generator (manifold) and the first bend. From the pictures, this would bring the entire assembly up a couple inches and keep the existing profile. It looks like you have clearance to raise it a tad this way as long as the running board is forward of the pipe.
__________________
Now an SOB
Traded Thor for Melbourne Prestige 24NP
2018 THOR Chateau 35SF
Two Labs, Bugsie & Blondie
Blondie passed in 2020 at 5 to Leukemia
|