Great feedback guys! I had thought about a “stop” on the arm itself, but it seemed to work fine without it. I’ll take another look later today.
I need to source materials and see about what that would take.
I would likely not use a hitch-shank as I used on the first one, but would make it out of .120 wall mild steel.
If I made / shipped it in kit form - where you’d need to bolt it together - I suppose then that could simplify packaging and perhaps minimize and sort of liability. IE - As delivered, it will do nothing. You put it together and use at your own risk.
Thanks again for the feedback and ideas!
__________________
Regards - Randy
2017 Thor Vegas 25.5
Randy’s Rod Shop & Fabrication
Midlothian, TX / Gold Canyon, AZ
|