|
I disconnected shore power and attempted to reset the inverter and still am getting an E03. I completely agree that there is a high likelihood that the bed plug is for a CPAP but couldn't get Thor to agree. They insist that the wiring diagram is correct and that both bed plugs are on 6A circuit. My next plan is to wire around the inverter to isolate it. This should also allow me to have an electrician test (trace) the wiring. Nothing on 5B (TVs, Fridge or plugs) work. This might be caused by the inverter not passing through power because of the E03 error.
__________________
|
Thor Forums
