I used the 6” tape.
Install:
1.I washed the roof.
2.(Optional )scraped the old dicor off so I had about a 1-1/2” area on each side of the joint for the eternabond tape to stick to.
3. Cleaned the surface with the eternabond cleaner .
4. Slowly put the tape down ( had help from the dw) and rolled the joint twice with a 1” paper hanger roller.
That’s it... enjoy less maintenance 👍🏼
P.S. I used a heat gun to soften the old dicor.
Hope this helps
__________________
Tom and Jen
2015 ACE 29.3
|