Removing side “tables”
I’m trying to tighten the table up. It wiggles pretty badly. I can find 2 exposed screw heads (one on each end of the “table”). When I loosen them and pull away from the wall I see what appears to be 2 screws that the heads are either inside the “table” or they’re heads are outside and screwed in.
The 2 “inside” screws I’m referring to are below my finger and thumb.
Any suggestions?
Thank you in advance!
I took out the cup holder. There are 3 screws holding a metal bracket to the wall and the table is attached to the bracket. The screw holding the top of the bracket is stripped so the bracket wiggles and so does the table.
If I can remove the leveling control panel I probably can remove the table and gain access to fix the metal bracket.
Any suggestions about removing the leveling panel?
__________________
|