if it is a corian branded cover, its PLASTIC thermoset resin based,
a fine tooth table saw blade will cut it, but you need to go slow and not allow heat to build up.
if you cut it taking small bites at a time, like 1/8" cuts. this will allow a smooth cut and not generate the heat that will ruin the material
if its some other material, like a formica over wood then you still need a fine tooth saw blade and and tape over where you want to cut and cut it face down to help prevent chips ore splintered ends
__________________
retired Navy driving the short bus 2008 Tuscany 4056
|