Quote:
Originally Posted by Beau388
Auto retract works because the patio awning's control module is always powered by the coach's power center through the inhibit relay located on the cab control board down by the driver's left foot. Breaking the power at any point will stop the patio awning movement. Best way to do this is to buy the CofC recommended control panel (with the on/off switch) and rewire the control module. This is what plant 750 should have done.
|
In my coach there is a five wire harness coming down the wall chase to the patio awning control. Three wires terminate at the extend/retract switch. The other two disappear into the floor. The colors are brown, gray, yellow, red and black. Red is power and black is ground. Yellow is the common for the movement switch with brown being the retract signal and gray being the retract signal. All drawers next to the sink have to be removed to access the wall chase. The only thing on my awning circuit is the LEDs in the roller.