Quote:
Originally Posted by novanoel
The driver seat could probably clear the steering wheel if there was about one inch of clearance. I'm thinking you could probably unbolt the seat, elongate the holes about one inch (length) and move the seat back. My two pennies worth....
|
Not sure about the Axis but I was looking at the seat mounting on my Challenger today. This winter I want to remove the seat to get better access to the fuse box so I can add another 12VDC power outlet on the left side of the dash.
To elongate the holes, on my coach at least, one would have to elongate 4 holes that are drilled through 1/8 inch steel.
The three bolts and nuts on the left side of the pic below are three of the 4 mounting bolts for the passenger's seat. The driver's seat mounting is the same.