This is the best solution (we set it at 108 degrees) and the water remains hot throughout the shower. Nobody else should turn on any other faucets at the same time.
Quote:
Originally Posted by Judge
What he said......
First, do not run any other water when showering because it will reduce flow and cause temps to drop.
Second, set the desired temp (we use 105) and then only open hot water and no cold water.
If you do this and have proper pressure / flow, you can take a hot shower all day long..... or until you run out of propane [emoji3]
If you can’t, then you’ll want to check for restrictions in your plumbing or an issue with the flow sensor or other problem in the unit itself.
This is the second coach I’ve had with the Girard and we like it.
|
Thor Forums
