Quote:
Originally Posted by engrprof
Hey, Thanks TurnerFam for the Surge Guard website. Eyesite bad when bending over to look inside compartment!! After looking at website I see the EXTERNAL tabs to take out screws holding Surge Guard box in place. My Bad!!
|
I would say the cover is only held by the two screws, the rivets would have been placed there under the cover, to prevent someone using a looooong screws and possibly shorting a control or wire.
While you are messing with it, once moved, it might be a good idea to "re-torque" the wire connectors inside the box. Torque values are given in the manual if you can get your hands on one. Stranded wire is notorious for loosening (under screw type connectors)when moved. My 2 cents...
Thor Forums
