Quote:
Originally Posted by halfprice
Yep I installed the fumoto valve on its first oil change. I attach a 3/8 clear hose to its nipple, the hose goes into a 5 gallon plastic gas can I bought just for oil. The can fits under the engine
Only possible mess is the filter. I get a 2 litter plastic coke bottle and cut the top off. Once loose the bottle fits around the filter it catches the filter and oil.
Jerry
|
If you loosen up the filter a little and take a punch and hammer to pierce the bottom of the filter and let the filter drain into a pan there is no mess or spilled oil, That's how I do mine but on the cummins engine the filter doesn't lay sideways so it works well.