|
I removed the carpet in the foot wells.
The mat pretty much lays in place. Where it didn’t, I used some 1” pocket-joint screws (Lowe’s). They are brown to match, have a wide head to hold the mat, and don’t require a pilot hole.
I did remove the table base between the seats, and reinstalled over the mat, using the original screws.
I also removed the black plastic edge piece that goes across the horizontal and vertically sections. I reinstalled that and used it to hold/finish the edges of the mat.
72” isn’t wide enough - this requires two mats
Dave
__________________
|
Thor Forums
