Quote:
Originally Posted by OldWEB
Now, if you follow the way Intellitec wants it wired, then the LED is "on" when the relay is closed and "off" when open. So if "off" then there should be no voltage on the system side of the relay... if there is voltage, the light will be "on" and I suspect a backfeed, wiring error, or something strange that Thor did. Follow their schematic.
|
The indicating light on the schematic is lit anytime there is 12 VDC applied to the "SYSTEM" side of that relay. The green wire is connected directly to the SYSTEM stud through a fuse. This only indicates the position of the relay when the battery is the only source of power in the boat or RV. Thor latching relays are wired correct per this diagram.