Quote:
Originally Posted by Carle
Hey all,
We have a 2016 Vegas 24.1. After removing the cap to the sewer outlet, you have to turn it down so you can attach the hose up from under the unit. Turning it downward is very difficult. I can do it, but my wife cannot. There are 4 bolts on the base of each pipe just before going into the final outlet. Does anyone know if these bolts can be loosened to make it easier to rotate this down and without causing it to leak?
Hope this makes sense … any thoughts are appreciated. Thanks
|
Yes, a bit tough to do. Personally, having previously owned the same rig, I would not loosen the bolts. I would try spraying some silicone spray and/or see if you can fit a small strap wrench around it for her so she can get some leverage.
Also make sure that the screws sticking out from the bottom of the sewer bay have some type of protection on their sharp points or have been changed out with bolts and nuts which is what I did. They will definitely make your hand look like a shark tried to rip off your hand.
Thor Forums
