Quote:
Originally Posted by Judge
So the fuses you found near the Use / Store switch could be for the awning, awning lights or other accessory. On my 2018 Outlaw 29H, there was an access panel to get behind the Use / Store Switch and other switches and I had fuses there for the awning and lights.
The power from the battery back to the 12V panel is a heavy gauge wire and why it uses the breaker I posted and not fuses.
You may want to start tracing the wires from your battery terminals. The 50 AMP breaker is typically not far from the batteries.
You may also want to try and gain access to the back of your electronics bay. It may be under your bed. The Latching Relay sometimes has fuses on it. If one is blown, that could prevent the relay from activating when you hit the Use / Store Switch. When you get the Use / Store Switch, you should hear the relay engage. But if the 50 Amp breaker or the latching relay fuse is blown, you won't hear anything.
The manuals never point out the exact location of some of these fuses and breakers because they tend to vary from build to build..... unfortunately.
|
Hmm... More food for thought. I've already looked under the bed no access for anything there. There is an access point at the back of the bedroom area but I found no fuses there or anything that could be of an issue. Any other idea where to look? Going to search around the batt again next time I go see it and look some more around as well. Thanks again.