I had my rig hooked up to shore power in preparation for a trip - fridge on. For some reason the GFI tripped and shore power went off. From there my batteries drained and my Xantrex Pro XM1800 flashed code 02. Then it stopped working.
I charged the batteries, they show 12.8 Volts output. When I remove the cables from the input terminals on the inverter and measure them on their own they also show 12.8 Volts.
When the cables are connected to the inverter and I measure across the input terminals I'm getting 4.8 Volts.
I've gone through my manual to see if there is a way to re-set the inverter but I'm kinda stuck. I submitted a request to the Xantrex support site but so far no response.
Any ideas?
Thor Forums
