I just installed the Roadmaster RSSA Reflex Stabilizer on our new 2019 Hurricane34j.
I used the front stabilizer jacks to lift the front up so I could use my jack stands and get under it.
You are right the large bolts were a bear to get off. I’m 72 and not as strong as I once was. But I did the same as you. Soaked the nuts and used a breaker bar to loosen the nuts. Used my hand held Ryobi 18v impact gun, it’s rated at 350 ft lbs of torque, and removed the bolts. The Ryobi got very hot from working so hard.
I was able to Re-torque the bolts with the use of a 4 foot extension to 250 ft lbs of torque. Other wise went on very easy. Works great.
__________________
BadmanRick
Good Sam Life Member
Good Sam Elite Member
FMCA Member
|