Thor Forums

[Pilobob]

Hi Jeff, I know Kim can make one for you, I’m not sure the measurements would be the same as my 29m. I took a plastic sheet and taped it tightly to the front of the coach. I then outlined the shape I wanted with a magic marker and cut it out to come up with the template. I went out about an inch all around. I attached it with snap buttons that I painted black. The male part of the snap is drilled into the front of the coach. I installed the snaps and hardware myself as I wanted to a tight fit. Kim did a great job, I paid around $60 for the whole job, he also included the hardware, and put a felt backing on it to protect the gel coat.I’m glad I did as the front grille on my coach is wide open. Radiator and transmission coolers are all exposed to debris.