2 Ideas....
1- A couple I know had continuous issues with their rear cap moving. The had the cap removed to see what else was broken and found that most of the screws were missing... only 4-5 screws were holding the rear on. Most of the trim screws missed the rear cap flange.
2nd idea- If the rear cap can be removed and the rear wall braced at the corners or spray-foamed all the areas that can be, it would help eliminate flex. If you have a solid rear wall with no window, Memphis model- you could spray foam the entire wall area.
And then reattach the cap with backing strips all the way around.
__________________
A&J
2017 Mobile Suite Memphis
|