Quote:
Originally Posted by twovillagers
I'm probably conservative as I know the transfer switch can take care of it. The potential problem is arcing and pitting of the contacts in the transfer switch due to having a load.
I turn off the A/C, then the main breaker, and turn generator off. Then re-power with shore power.
|
The Progr essive Dynamics, Inc. manual does not states weather or not you should remove load before it being transfered.
The manual does describe how to trouble shoot for pitting.
This might be something you want to contact the manufacturer to get clarification on about removing load before enabling the transfer switch to occur.
Thor Forums
