Quote:
Originally Posted by Rollingon6
We have a 2000 four winds hurricane. The disconnect switch didn't have power when not connected to shore power. It's a rocker style switch. We replaced the switch, didn't fix it, we replaced the solenoid in the battery control center, we now have power to the switch but it will only keep power if we hold the switch down. We have placed the small circuit breaker as well.Should we bypass the disconnect switch,us it safe to do so?We are not electricians, any suggestions would be helpful.The chassis disconnect switch is working properly.
|
So you have both a chassis and a house disconnect switch?
The chassis disconnect switch works normally.
You replaced the "solenoid" for the house disconnect switch.
The house disconnect switch now only makes connection when held in one position or the other.
Sounds like you replaced the latching relay with a momentary solenoid. Verify you have the correct part installed. They look identical sometimes.
Thor Forums
