|
Just installed one 190W panel on my chateau 22E that has the Go Power 10Amp charge controller. After making final connections, no current in spite of good sunlight. I disconnected and measured current directly from the panel and got reasonable numbers (21V 6A). Reconnected, measured current at the back of the controller ... zero! I ran some electrical wire from the back of the controller to the roof and found the negative wire is an open circuit! (positive is fine). Anybody had seen that before? It's basically a brand new unit. Am I missing something (like there is a fuse or a relay somewhere) or did this just get fucked when they built the unit?
__________________
|
Thor Forums
