Quote:
Originally Posted by cbergren
We recently purchased a gently used 2012 40ft Tuscany. When it’s plugged into shore power, it will randomly click from shore power to inverter and quickly back to shore power. We had the relay switch replaced, but that did not fix the problem. We love our new rig, but this problem is very annoying. Any ideas on what might be wrong?
|
My turn at the proverbial 'ring'...
As others mentioned, more information is required to assist. My thoughts on this is that if you have a dedicated inverter and the battery supply is dead, then when plugging in the shore cord will start the charging process - batteries reach a certain "minimum level" for the inverter and it connects to the system... which will immediately 'drain' the uncharged battery and switches back to the shore power. I could see this happen until the batteries accept a certain amount of charge to keep the inverter "on".
So, fill in the blanks so others can assist, what others have suggested is good info.