we had both passenger and drivers side leak....but only in huge downpours.
two things I found:1 the point where the front cap and body come together were separating. proper caulking and new longer screws fixed this issue.
second issue was the installation of the window caulking. I ended up sealing the window by filling the gap with self leveling caulking. (only the top 3/4 of the window.)
our damage did not require any wall repairs. remove the window screws on the bottom, none of ours were rusted.
All the repairs were done with guidance from posts on this forum.
might take a bit of searching as I find quite a few 24.1 owners are very hands on.
Good Luck!
BTW we are in Kingston.
Rick
__________________
|