Hmmmmmm.....
Check the rear "C" cab to frame mounts & the front house to frame mounts...
I suspect the mounts have too much "give"when the slide is deployed..
Also measure the distance from the ground to the frame and house to ground in that questionable area to see if something is flexing.. All it would take is a quarter to half an inch vertical change..
[edit]
Watch the floor inside @ the transition point of cab to house when leveling and when extending/retracting the slide... I have read that some of the class C's had an issue with gaps in the floor under the carpet so was not seen..
Good Luck
__________________
current coach
An SOB Shack called Foretravel...This will Do.
former coach
Thor Infinity
|