07-21-2020, 03:34 PM
|
#14
|
Senior Member
Brand: DRV
Model: 39TKSB3 "Modified"
State: South Dakota
Posts: 1,838
THOR #1661
|
Quote:
Originally Posted by GTM41261
Ryno. Well it was tight but I drilled through the bottom plate of the wall and used 1.1/2 X 5/16 bolts with fender washers. There was just enough room to work by feel with my fingers to drop the bolt in from the top. I was able to get a box end wrench on the bolt then ran the nuts tight with the trusty 1/4 drive Dewalt impact driver.
|
Mad skills!
__________________
|
|
|