|
I made a simple remote control lock. It can also use rf cards or a fingerprint scan.
It took about 10 minutes to hook it to the little red up/down lever.
A universal power door lock automotive replacement works perfectly.
How you open it is combination keypad or laser or anything in between.
But.
It took.me 12 minutes to figure it out and make it work.
It took me 1 minute to remove it because it interferes with the screen in a place where modding the screen would be hard or ugly.
If you will carve a 2x3 inch hole in the door or the screen, you can have a power lock.
Or
It doesn't take much of a plate to make the ones commercially available fit.
After doing the research and building both... I just didn't care as much as I thought.
It's doable by those who do.
You won't find a bolt-in one commercially available. Without modification.
If the op is truly interested and wants to start a group grope brainstorn/how to thread, I'll show the pieces you need to make it all work.
|
Thor Forums
