Air compressor storage bay
Inspired by some post I saw I set out to set up my air compressor/tool bay.
I decided to do it on the passenger side of our Windsport 35M left of the outside plugs so I wouldn't have to mess with power.
I started out with a harbor freight 100psi compressor and a retractable hose.
I didn't want to make any holes but wanted the compressor and hose to be secure and not bouncing around.
I cut a piece of 3/4 plywood 21.5 inches by 38. I originally cut it at 40 but could not fit the board in.
I also had to cut a piece 8x17 to support the hose case. I screwed the hose case to 2 wedges below some tanks.
__________________
|