Quote:
Originally Posted by Bnbl
I have a 34J with all the plumbing under the bed. I added a bypass from the city water side of the pump and attached it to the winterizing port on the intake side of the pump. If you are ok with doing some pex plumbing this works really good. When the valve is open it backfills the FW tank.
Attachment 25229
Attachment 25230
|
Great idea. I think I will do the same but I'll use this valve and wire the switch by the inverter control by entrance where I can watch the tank level.
https://www.amazon.com/dp/B018WRJYUE/