Quote:
Originally Posted by Bob Denman
Good luck getting everything lined back up, and looking great again!
|
I was looking at the bottom of the slide the other day and realized how easy it is going to be to do the adjustment. This is not a Schwintek so mounting and adjustment is different. The slide can be loosened, raised about 1/2 inch and then the bolts tightened. The issue is the slide picture frame bottom is overlapping the body trim moulding by about 1/2 inch. The painting will only have to be done to the slide once it is raised.
Based on my conversations with Entegra and Jayco Factory Service, it is not a common problem but it is one that Jayco has seen before with the Seneca models having the dinette slide.