Quote:
Originally Posted by Mr Sunshine
Are you using the sucky (Seiki) tvs? After you turn off the booster, you have to go to menu, then channels and cable. You can also change it via the source button.Then you must scan for channels. You can't skip the scan step.
Also, there is a cable splitter behind the microwave. The only access is to remove the microwave, which isn't hard but a second set of arms would help. All the connections on mine were loose, but not loose enough to affect. If yours were too loose, you wouldn't get antenna tv on your bedroom tv.
I replaced the living area tv with a smart tv a couple of years ago after experiencing a couple of parks that the sucky tvs didn't work due to having no QAM tuner. Since then, we've been in dozens of parks with cable and the remaining Seiki worked fine with all of them.
|
Yes I've gone thru the complete process of setting up for cable tv. Good info on cable connection behind microwave.